Ingot alloys

We produce various alloys as ingot metals with an ingot weight of approximately 10 to 15 kg in line with international standards or customer requirements. The pallet weight may vary depending on individual arrangements.

  • Block weight: 6 - 10 kg
  • Staack weight: 500 – 1000 kg
  • for sand and ingot mould alloys strontium- permanently refined on request

Sand- und Kokillenlegierungen

  • AlSi6Cu4 (225) EN AB-45000
  • AlSi8Cu3 (226A) EN AB-46200
  • AlSi12(Cu) (231A) EN AB-47000
  • AlSi10Mg(Cu) (233) EN AB-43200
  • AlSi10Mg(a) (239A) EN AB-43000
  • AlSi10Mg(b) (239) EN AB-43100
  • AlSi12 (230A) EN AB-44100
  • AlSi5Mg (235)
  • AlSi6Cu4 (023)
  • AlSi12CuNiMg (260) EN AB-48000
  • AlMg3 (242) EN AB-51100
  • AlMg5 (244) EN AB-51300
  • AlMg5(Si) (245) EN AB-51400
  • AlSi7Mg(0,3) EN AB-42100
  • AlSi7Mg(0,6) EN AB-42200
  • AlSi9Mg EN AB-43300
  • AlSi11 EN AB-44000
  • AlZn10Si8Mg EN AB-71100
  • AlZn15Si8Mg
  • AlZn7Mg
  • AlCu4MgTi EN AB-21000
  • AlCu4Ti EN AB-21100
  • AlCu4MgTiAg

Die casting alloys

  • AlSi9Cu3(Fe) (226D) EN AB-46000
  • AlSi12Cu1(Fe) (231D) EN AB-47100
  • AlSi10Mg(Fe) (239D) EN AB-43400
  • AlSi12(Fe) (230D) EN AB-44300
  • AlSi10MnMg EN AB-43500

Block metal production

  • Block weight approx. 10-15 kg, pallet weight by arrangement.
  • block geometry: narrow side approx. 50mm x 390mm, wide side approx. 100mm x 435mm, height approx. 60mm

Copper-aluminium alloys

  • CuAl9-B (CB330G) GB-CuAl9Ni (DIN 17656, material no. 2.0972)
  • CuAl10Fe2-B (CB331G) GB-CuAl10Fe (DIN 17656, material no.. 2.0941)
  • CuAl10Ni3Fe2-B (CB332G)
  • CuAl10Fe5Ni5-B (CB333G) GB-CuAl10Ni (DIN 17656, material no. 2.0976)
  • CuAl11Fe6Ni6-B (CB334G) GB-CuAl11Ni (DIN 17656, material no.. 2.0981)

Copper-zinc alloys

  • CuZn15As-B (CB760S)

Copper-zinc-aluminium alloys

  • CuZn36AlAsSb-B (CB771S)
  • CuZn37Al1-B (CB766S), GB-CuZn37Al1 (DIN 17656, material no. 2.0605)
  • CuZn38Al-B (CB767S), GB-CuZn38Al (DIN 17656, material no. 2.0601)
  • CuZn42Al-B (CB773S)

Copper-zinc-lead alloys

  • CuZn33Pb2-B (CB750S), GB-CuZn33Pb (DIN 17656, material no. 2.0291)
  • CuZn33Pb2Si-B (CB751S)
  • CuZn35Pb2Al-B (CB752S)
  • CuZn36Pb-B (CB770S)
  • CuZn37Pb2Ni1AlFe-B (CB753S)
  • CuZn39Pb1Al-B (CB754S), GB-CuZn37Pb (DIN 17656, material no. 2.0342), GB-CuZn39Pb (DIN 17656, material no. 2.0383)
  • CuZn39Pb1AlB-B (CB755S)
  • CuZn39Pb1Al-B (CB757S)
  • CuZn36Pb1AlAsSb-B (CB772S

Copper-zinc-silicon alloys

  • CuZn16Si4-B (CB761S), GB-CuZn15Si4 (DIN 17656, material no. 2.0493)
  • CuZn21Si3P-B (CB768S)

Other copper-zinc alloys

  • CuZn25Al5Mn4Fe3-B (CB762S), GB-CuZn25Al5 (DIN 17656, material no. 2.0608)
  • CuZn32Al2Mn2Fe1-B (CB763S)
  • CuZn34Mn3Al2Fe1-B (CB764S), GB-CuZn34Al2 (DIN 17656, material no. 2.0606)
  • CuZn35Mn2Al1Fe1-B (CB765S), GB-CuZn35Al1 (DIN 17656, material no. 2.0602

Copper-tin alloys

  • CuSn10-B (CB480K, GB-CuSn10 (DIN 17656, material no. 2.1051)
  • CuSn11P-B (CB481K)
  • CuSn11Pb2-B (CB482K), GB-CuSn12Pb (DIN 17656, material no. 2.1065)
  • CuSn12-B (CB483K), GB-CuSn12 (DIN 17656, material no. 2.1053)
  • CuSn12Ni2-B (CB484K), GB-CuSn12Ni (DIN 17656, material no. 2.1063)

Copper-tin-zinc-lead alloys

  • CuSn3Zn8Pb5-B (CB490K), GB-CuSn2ZnPb (DIN 17656, material no. 2.1099)
  • CuSn5Zn5Pb2-B (CB499K)
  • CuSn5Zn5Pb5-B (CB491K), GB-CuSn5ZnPb (DIN 17656, material no. 2.1097)
  • CuSn7Zn2Pb3-B (CB492K)
  • CuSn7Zn4Pb7-B (CB493K), GB-CuSn7ZnPb (DIN 17656, material no. 2.1091)
  • CuSn6Zn4Pb2-B (CB498K)

Copper-tin-lead alloys

  • CuSn5Pb9-B (CB494K)
  • CuSn10Pb10-B (CB495K), GB-CuPb10Sn (DIN 17656, material no. 2.1177), CuSn7Pb15-B (CB496K) und GB-CuPb15Sn (DIN 17656, material no. 2.1183)
  • CuSn5Pb20-B (CB497K), GB-CuPb20Sn (DIN 17656, material no. 2.1189)
  • Kupfer-Zinn-Zink-Phosphor-Schwefel-Legierungen
  • CuSn4Zn2PS-B

Copper-nickel alloys

  • CuNi10Fe1Mn1-B (CB380H)
  • CuNi30Fe1Mn1-B (CB381H)
  • CuNi30(CM390H)

Copper-silicon-zinc alloys

  • CuSi4Zn4MnP-B (CB245E)
  • CuSi4Zn9MnP-B (CB246E)
  • CuSi3ZnMn

Copper-aluminium-nickel alloys

  • Minox

Production of ingot metals

  • Block weight approx. 10-15 kg, pallet weight by arrangement
  • ingot geometry: narrow side approx. 50mm x 390mm, wide side approx. 100mm x 435mm, height approx. 60mm

copper master alloys

  • CuFe20 (CM205E, CM206E), V-CuFe20 (DIN 17657, material no. 2.1616)
  • CuFe30
  • CuMn30 (CM209E, CM210E), V-CuMn30 (DIN 17657, material no. 2.1622)
  • CuMn50 (CM211E), V-CuMn50
  • CuSi10 (CM231E, CM232E), V-CuSi10 (DIN 17657, material no. 2.1637)
  • CuSi15, V-CuSi15
  • CuAl50 (CM344G, CM345G), V-CuAl50 (DIN 17657, material no. 2.1602)
  • V-CuP10 (CM215E), DIN 17657, material no. 2.1631, only trade, no own product!)

  • Block weights and dimensions on request
  • Slab weights and dimensions on request
  • Packing on pallets or in big bags
  • Pallet weight according to customer requirements

  • Fine zinc, delivery form plates
  • Tin, delivery form blocks
  • Smelter lead, delivery form blocks
  • Silicon, delivery form broken pieces grain size 10-150 mm
  • Manganese, delivery form flakes

Your Contact Partners

Dieter Allers

Head of international trade

Phone 0049 040 789 708 0

Get in touch